Pages


Friday, August 27, 2010

Miscellaneous Work

Time for the awful truth:  My kiln is dead.  I put this bead in it and left it alone, figuring it would do its thing.  What it did was allow the bead to soak for an undetermined amount of time then essentially air cool, without even a fiber blanket to keep it warm.  Its performance has been so so for a while, I think, but this time I caught it.  I'm holding the bead together here.  It was merely cracked, but fell apart in my pocket, cutting my hand as I tried to retrieve it.  I am particularly angry with this bead, since it really was pretty before it cracked and then it went and bit me.

It was supposed to be the focal to go with some of these beads, all made with Effetre Caribbean blue.  The focal shown didn't come out as I hoped because I smeared the yellow badly while encasing and it went particularly ugly with the dark line reaction with the light sky blue of the Caribbean.

This happened a while ago.  It's just taken me a while to feel objective enough to write it down.  I've been making spacers and stuff I can do in annealing bubble, but it isn't the same and I've been doing other mediums, such as polymer clay and wire.  Above is a copper chainmaille bracelet I'm chewing up and the framework for my first effort at Viking knit.  I have to get a chunk of wood and drill some holes to draw it through.
This is the finished polymer clay tree.  I quit when I realized I would never be able to sand it past those gouges left by trying to press it out with my fingers without ruining the tree entirely.  I now own a nylon rolling pin (meant for fondant) and some toungue depressors.I'm at a bit of a loss to explain those white marks in the color.  Any answers, polymer clay folks?


I did pick up some new glass, hoping to lift my spirits while I'm whiling away the time waiting to save up for a new kiln.  The left 3 beads are DH Clio, looking as unlike any Clio beads I've seen as they could.  I don't know whether I messed up the strike or whether they would have finished striking during annealing (sniff) but the darkest I got was a root beer kind of color.  It could be the reducing HotHead, too, because even the plain bead on the left got reduced, and I wasn't even trying to.  2nd in from the left is Clio over clear and 2nd from the right is Clio reduced and encased with clear.  On the right is CiM African grey, which looks a lot like hippo.  I have to dig out my hippo beads and make a comparison.  I'll be honest, I'm really not as excited as I should be about getting the first new glass I've had in almost 6 months.  I'm over halfway there.  Another couple months and I'll be either crazy or back in business.

2 comments:

  1. My awful thing is I don't know what's wrong -- my propane tank (which is full), my torch, or my oxycon. Something, though, is wrong. So I ordered a new torch (that I was getting for Christmas anyway) and will have a new propane tank and a friend will help me figure out this ANNOYING conundrum!

    ReplyDelete
  2. I hope the torch helps. That glass that got in the old one may have done it in. A real torch is on my "to do list," but I can't have it in my apartment so it's pretty near the bottom.

    ReplyDelete

Thank you for your comment!